Amped Wireless Range Extender 600mW

Amped Wireless High Power Wireless-N 600mW Range Extender SR10000 setup

1.Setting up hardware connections:

  1. Look for the antennas in the package.
  2. Fix the antennas to the antenna ports located at the back of the Amped Wireless 600mW Range Extender.
  3. Attach the included PoE power cable of the power adapter at the PWR port of amped 600mw extender.
  4. Connect the power adapter to the power outlet and turn it on.
  5. Also, establish connection between the Amped Wireless 600mW Range Extender and the computer.
  • Attach the Ethernet cable to one of the available LAN ports on the back of the Amped Wireless 600mW Range Extender at one end and to the network port of the computer on the other end.
  1. Connect the computer to the power and turn it on.
  • If the computer shows no wifi network connectivity or has trouble accessing the web menu, connect the Amped Wireless 600mW Range Extender and repeater wirelessly to the computer as well.
  1. To establish the wireless network connection, connect computer to the Amped Wireless 600mW Range Extender wifi using the default wireless SSIDs; amped_rep2.5GHZ or amped_rep 5 GHZ.
  2. Enter the default security key- “wireless” to connect to the amped wireless 600mW extender’s network.
  • The default wireless network settings of the Amped Wireless 600mW Range Extender are mentioned its label or can be found on the wifi configuration card.

2.Amped Wireless 600mW Range Extender setup – accessing the web menu

  • Launch a supported web browser on your amped wireless extender’s wifi connected computer above through wired or wireless setup.
  • Navigate to the amped extender login default domain address setup.ampedwireless.com in the web address bar.
  • This step requires no network connection for accessing the extender’s web menu via setup.ampedwireless.com. The web menu gets auto-launched directly from the Amped Wireless 600mW Range Extender.
  • If the web menu is not reached, or doesn’t launch automatically on setup.ampedwireless.com login, try using another supporting web browser.
  • If still the web menu is not being accessed with setup.ampedwireless.com, use alternative default IP address 192.168.1.240 instead in the web address bar.
  • The Amped Wireless 600mW Range Extender’s web menu page gets auto-launched.
  • The smart setup wizard screen for amped extender setup appears on the computer.
  • Click on Next link.
  • This begins the Amped Wireless 600mW Range Extender setup and wifi configuration process.
3.Amped Wireless 600mW Range Extender setup – through smart setup wizard
  • The smart setup wizard automatically guides though the Amped Wireless 600mW Range Extender setup process.
  • The wizard begins setup by scanning for available home wireless router’s network.
  • Click on SCAN link.
  • This automatically searches for the available wireless networks nearby to be extended.
  • Select the source router’s SSID to extend it using the Amped Wireless 600mW Range Extender.
  • For a dual band home or source router network, setup wizard would display SSIDs of both 2.4 GHz and 5GHz bands.
  • Select the desired wifi network band.
  • If you wish to extend only one wifi network signal, select SSID of either of the two bands.
  • But, if you wish to extend both of the wifi signal bands, select the SSIDs of both 2.4GHZ and 5GHZ.
  • The selected wireless network name/SSID should display signal strength of 70% or greater t be repeated successfully by Amped Wireless 600mW Range Extender.
  • If signal strength is far low than 70%, you need to re-locate the Amped Wireless 600mW Range Extender closer to the source router for better signal strength.
  • Also, if the SSID of your router’s wifi is not displaying, you must have placed the extender too far from the router and must re-position it closer to the source.
  • Position the Amped Wireless 600mW Range Extender at an optimal location where signal strength should be 70% or greater.
  • Click on Next link.
  • You would be prompted to enter the security key for the selected source router’s SSID.
  • Enter separate wireless security keys for both 2.4 and 5GHZ bands SSID.
  • Click on next.
  • The Smart setup wizard notifies about wireless settings and displays them after checking the network settings through Connection test launch automatically.
  • The amped wireless extender’s extended network settings would be displayed with SSID ending with “_RE” prefix at the end.
  • You would be prompted to assign a wireless network name /SSID for your Amped Wireless 600mW Range Extender.
  • Also, create and assign a new security key to connect to the extended wifi network.
  • Click on next.
  • The Amped Wireless 600mW Range Extender’s wifi settings would be saved.
  • The smart setup wizard would start the setup countdown to finish the amped extender setup.
  • The Amped Wireless 600mW Range Extender reboots as the setup wizard countdown continues.
  • The Amped Wireless 600mW Range Extender disconnects from the extended wifi connection on rebooting.
  • Connect the wireless devices to the Amped Wireless 600mW Range Extender’s extended network.
  • Use the above created SSID and wireless security key to connect to the Amped Wireless 600mW Range Extender’s extended wifi.
  • The Amped Wireless 600mW Range Extender setup completes successfully when the congratulations screen shows up on the computer.
 
Troubleshooting:
I am unable to connect to Home Network due to Error on running the Smart Setup Wizard. What to do?
  • Check if you entered a correct home or source router’s network security key to connect.
  • The Amped Wireless 600mW Range Extender must be located too far from your source router. You would have to reposition it close to router and run the Amped Wireless 600mW Range Extender setup via smart Setup Wizard again.
  • Ensure that the source router network delivers a signal strength of 70% or greater.
 
  I am unable to access the web menu on setup.ampedwireless.com login. How to resolve?
  • Ensure to connect the computer to the Amped Wireless 600mW Range Extender Smart Repeater with included Ethernet cable and not connect with a wireless connection.
  • Try using a different web browser to access the web menu as the recommended option is Google Chrome web browser.
  • If still the web menu is not being accessed with setup.ampedwireless.com, use alternative default IP address 192.168.1.240 instead in the web address bar.
  • Power off the Amped Wireless 600mW Range Extender and power on again.
  • Reset your Amped Wireless 600mW Range Extender to factory default settings and try accessing stup.ampedwireless.com again.

Leave a Reply

Your email address will not be published. Required fields are marked *