Installing Amped Wireless High Power Wireless-N Smart repeater and range Extender SR300

Before you Setup your Amped high power Wireless-N Smart Repeater and Range Extender SR300 using setupa.ampedwireless.com web interface, you must position your Amped SR300 extender as below:

  • Place your Amped high power Wireless-N Smart Repeater and Range Extender SR300 at a suitable setup location which should be midway between the home wireless router and the your wireless dead zone area.
  • The amped range extender must receive a strong wifi signal from your wifi router with advisable signal strength of more than 70% in the location of setup.ampedwireless.com setup.

Setup.ampedwireless.com setup – setting up Amped high power Wireless-N Smart Repeater and Range Extender SR300:

You must connect the Amped high power Wireless-N Smart Repeater and Range Extender SR300 to the computer using a wired Ethernet cable connection at the LAN port or using wireless connection over wifi for amped extender setup, though wired setup.ampedwireless.com setup is preferred.

  • Launch a web browser on your computer connected to the SR300 amped extender as above.
  • Enter amped wireless setup default web login setup.ampedwireless.com in the address field.
  • Sometimes, setup.ampedwireless.com fails to open the extender’s web menu and access the smart setup wizard, use default amped login IP address http://192.168.1.240 in the address bar.
  • The Smart Setup Wizard screen would be automatically reached after successful amped extender login.
  • The smart setup wizard then guides through amped wireless setup process onscreen.
  • Click on SCAN link to search for the available home router’s wifi network name/SSID that has to be extended with setup.ampedwireless.com setup.
  • Select the home Wi-Fi network SSID to be extended with the Amped Repeater and Range Extender SR300.
  • If the home router is dual band, you must select both 2.4 GHz and 5GHz bands wifi network SSIDs.
  • As recommended, you must select the home router’s wireless signal strength being 70% or greater.
  • If signal strength is less than 70%, keep your Amped high power Wireless-N Smart Repeater and Range Extender SR300 closer to the home network router.
  • Click on Next link.
  • Enter the wireless network password in required fields of your above selected home network SSID.
  • Configure your amped wireless SR300 Range Extender’s settings for your extended wifi networks.
  • For amped extender settings to be configured manually or copy them from your home wifi network settings, you are allowed to lick choose link.
  • The newly extended Wi-Fi settings will be displayed for both the bands on the screen.
  • You would be opted to enter new wireless network name /SSID for both the bands as well as and passwords for your extended wireless network.
  • Click next link to save the configured settings.
  • The smart setup wizard completes the countdown process and redirects to another step for setup.ampedwireless.com setup.
  • The Amped high power Wireless-N Smart Repeater and Range Extender SR300 reboot during the smart setup wizard setup.ampedwireless.com setup countdown.
  • The Amped high power Wireless-N Smart Repeater and Range Extender SR300 would disconnect from the Wi-Fi connection during the reboot.
  • You must reconnect your wireless devices to the Amped high power Wireless-N Smart Repeater and Range Extender SR300 Extended Wi-Fi Network.
  • Enter the wireless network name SSID and wireless network password for either 2.4 or 5 GHZ bands extended network.
  • After successful connection to extended network, click OK.
  • This would finish the setup.ampedwireless.com setup process.
  • Amped high power Wireless-N Smart Repeater and Range Extender SR300 is successfully configured and your setup.ampedwireless.com setup summary will be displayed on your computer screen.

 

Leave a Reply

Your email address will not be published. Required fields are marked *